CASTING COACH: Two-Handed Casting Grip

Before we go any farther with single-handed casting, I want to stop and introduce a couple of things about two-handed casting. There is a lot of interest in two-handed casting these days. Two-handed casting is as simple as single-handed casting. I want to introduce the two-handed casting grip here because much of what we learned about single handed casting up to this point is EXACTLY the same for two-handed casting. So, you might as well come to the realization that you are learning important things about them both at the same time, whether you previously realized it or not. And for those of you that already have single-handed casting down and are interested in two-handed casting, this will show you that you are already farther down the road than you thought.

Knowing the point of balance of your 2-handed rod is important. This point is where you will place your hand on the forward grip. Gripping the forward grip in this place cuts back on fatigue because you won't have to grip the cork so tightly to lift the tip off the water all day long. Now, if you have shorter arms and want to move that balance point back a little, you can add weight to the reel or get a heavier reel. This is one reason you should consider getting your reel after you get your rod. Shoot me a note if you would like for me to share with you how to properly balance your rod (too much info for this segment). Also, depending on what you are casting, you may need the forward hand closer to or further from the reel. You may need to move your hand up further on the grip when using long belly lines. You may need to move the hand closer to the reel when casting short belly lines like Skagit or Scandi lines. Shorter belly lines require more use of the bottom arm to casting the short belly lines. So, find the balance point of your rod and then work on your grip from there.

Now, look back at our lessons on how to grip a single-hand rod. The grip on the forward rod grip of a two-handed is the EXACT same grip.

See, you already know what to do. More important, I want to you focus on the position of the rod in this picture. This picture represents that point right after a cast. Notice the forward rod grip is right along my forearm and the back grip is practically in my armpit. Practice holding the rod in this position, build muscle memory for this position, and make it feel natural. This combined grip needs to be wide and the back grip needs to be in next to the body at the end of a cast (not extended a foot away from the body). Trust me! Practice this position. Make it second nature. Fixing this now will make your casting so much easier when we start discussing it.

This is just a view from the opposite side of the body. 

Grip the Back Grip with your opposite hand as if you were shaking the rod's hand. Now, relax and be comfortable with that grip. No hard white-knuckling squeeze is necessary.

This picture is also a great place to discuss stance. 

As with the grip, stance should be comfortable and allow you to make the necessary rotations and transfer of body weight needed to cast. 

If you cast right-handed you want the left foot forward so that you can rotate around to the right. If your right foot is forward, you cannot rotate enough (back to the right).

If you want to make a cast from the opposite shoulder or cast left-handed, switch your feet so that the right foot is forward to allow for adequate rotation to the left.

While you are practicing the grip and post-cast positions, be mindful of your stance as well and get used to it.

Work on all of the things suggested in this series. Build your muscle memory and make it comfortable. You'll be ready for the next lesson of roll casting with the two-handed rod in no time!

Are you ready to work on your casting? Call me. LET'S GET CASTING!

From Grandpa...

Jacob's grandmother called me a few weeks ago. His grandfather passed several years ago and left Jacob some fly fishing gear. Now that he is about to turn 12, she wanted to get him some casting lessons so he could put the old fly rod to work. Of all of the stuff we do at Fisher of Men Outfitters, this is the stuff I live for! What a great time introducing the next generation of fly fishers to the sport. Jacob really took to casting quickly. Below are the feedback pictures I sent to Jacob this morning. These pictures are not staged. They are photos I take throughout the lesson as we work on each technique. This is the stuff I do for each casting lesson so that you have a way to better reflect on your lesson and make ongoing adjustments.

Are you ready to start casting or tweak your casting? Call me! LET'S GET CASTING!

False Cast

We were working on false casting to increase line speed, move line, and tighten loops on the stream yesterday. Visualize that line rolling off of the tip of your rod. 

As I told Steve, the 1st rate limiting step to fly fishing is being able to cast enough line to get an offering to the fish. False casting like this can better help you not only visualize what your line is doing, but also help you feel what the rod and line are doing as you make LOADING MOVES to POWER SNAPS.

Are you ready to take your game to the next level? Call me! LET'S GO FISHIN'!

CASTING COACH: ROLL CAST

The Roll Cast is a most important cast. Not only is it the simplest cast for beginners, but it might just be the most versatile and most important cast you learn. In fact, I'd say, when casting small streams, it's far more important than overhead casting.

The Roll Cast includes all of the 3 steps we learned in our last lesson: Loading Move, Power Snap, & Follow Through. The difference being that the roll cast has only a forward cast (no backcast). As with everything we have discussed so far, attention to the details of hand/arm positions is fundamental to a good roll cast. So, stay focused on the hand and arm and you will be making perfect roll casts in very short order. The steps are outlined with the photographs below.

In this starting position, just check a few quick things. The grip needs to be proper and relaxed. A target needs to be chosen (we never just cast at nothing...right?). While you can roll cast with a square stance, this is a good time to check your stance. Have the foot of the casting arm slightly back. This will be more comfortable and get you used to this important position. Having that foot back will allow rotation at the hips which will be important later with other casts. 

Once you are ready, then lift the rod (tilted out slightly) to the position we learned for the backcast in previous lessons.

Once in the backcast position, you have all of the time in the world to make your roll cast. So, RELAX and CHECK ALL OF YOUR HAND AND ARM POSITIONS.

If the hand and arm positions are correct, confirm that your line is making a D-Loop behind you (it will make the shape of a "D" with your rod).

Ok, hand/arm positions are correct and you have a D-Loop. Now we're going to make our 1st LOADING MOVE to a POWER SNAP.

The LOADING MOVE (motion which causes the line to load energy into the rod) consists of rotating the arm down at the shoulder joint and extending the forearm at the elbow joint. The motion is most easily thought of like a chopping motion with a Tomahawk (though not that forceful).

This image just helps you better visualize the need to have the rod tilted slightly out to be able to form the D-Loop.

As you come down to this position with the LOADING MOVE, the POWER SNAP consists of the position we learned for the stop of the forward cast.

The POWER SNAP consists of an abrupt stop while simultaneously pressing the rod grip with the bottom of your thumb and rolling pressure to the bottom of the rod grip sequentially from the 5th finger to the index finger. Remember, you are stopping with the end of the thumb pointing right at your target. 

As quickly as you made the abrupt stop with the POWER SNAP, relax your grip and gently lower your rod tip for the FOLLOW THROUGH.

BANG! You got it! Take your time, relax, check all of your positions, and practice practice practice. This is easy if you just use the skills you have already learned and now put them together.

Sometimes the wind is working against you, blowing from your casting shoulder across your body. When this happens it will blow your D-Loop right into you and make is difficult to complete your roll cast. What to do?

It's simple, you'll just roll cast off of your opposite shoulder this time. The steps are the same except this time you will bring your grip up to the level of your forehead lined-up with your nose in the center of your head. Tilt the rod over your opposite shoulder this time and let the D-Loop form on the opposite side of your body.

Relax, check all of your positions, and proceed with your LOADING MOVE, POWER SNAP, and FOLLOW THROUGH.

From the back so you can see the proper rod tilt for roll casting off of the opposite shoulder.

Once you have mastered this you will be half way home with the basic overhead cast. Remember, focus on mastering the fundamentals of the hand and arm positions for each of these steps and you will cut years off of becoming a fantastic fly caster!

Are you ready to start casting or improve your casting? I can help you with that. Call me! LET'S GET CASTING!